ZyXEL Communications Prestige 661H Series User Manual Download Page 78

Page: 78 / 547

Prestige 661H/HW Series User’s Guide

Chapter 5 LAN Setup

Figure 22

LAN Setup

The following table describes the fields in this screen.

Table 14

LAN Setup

LABEL

DESCRIPTION

DHCP

If set to

Server

, your Prestige can assign IP addresses, an IP default gateway

and DNS servers to Windows 95, Windows NT and other systems that support

the DHCP client.
If set to

None

, the DHCP server will be disabled.

If set to

Relay

, the Prestige acts as a surrogate DHCP server and relays DHCP

requests and responses between the remote server and the clients. Enter the IP

address of the actual, remote DHCP server in the

Remote DHCP Server

field in

this case.
When DHCP is used, the following items need to be set:

Client IP Pool

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

Size of Client IP

Pool

This field specifies the size or count of the IP address pool.

Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the

DHCP clients along with the IP address and the subnet mask.

Summary of Contents for Prestige 661H Series




































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 661H Series

Reviews:

Related manuals for Prestige 661H Series

Brands by name

Popular brands

ZyXEL Communications Prestige 661H Series, User Manual

Search results

Summary of Contents for Prestige 661H Series

Reviews:

Related manuals for Prestige 661H Series

Brands by name

Popular brands