ZyXEL Communications Prestige 650ME, User Manual, Page: 72 / 199

Prestige 650ME ADSL Bridge
4-8 Remote Node Configuration
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.
Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that
blocks NetBIOS packets (call protocol filter = 1). Include this in the call filter sets if you want to prevent
NetBIOS packets from triggering calls to a remote node.
Figure 4-4 Menu 11.5 – Remote Node Filter
Note that call filter sets are visible when you select PPPoE encapsulation.
4.4 Traffic Redirect
Traffic redirect forwards W AN traffic to a backup gateway when the Prestige cannot connect to the Internet.
An example is shown in the figure below.
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=