Prestige 650H-E
4
2 Hardware
2.1 Rear Panel Connections
Figure 1 Prestige Hardware Connections
Table 1 Prestige Rear Panel Description
LABEL
DESCRIPTION
1.
DSL
Connect to a telephone jack using the included phone wire.
2.
LAN 1..4
Connect to a computer/external hub using an Ethernet cable.
3.
POWER
Connect to a power source using the power adapter for your region (see your
User’s Guide
).
After you’ve made the connections, connect the power cable to a power supply and push in the power button to
turn on the Prestige.
The
PWR
LED turns on. The
SYS
LED blinks while performing system testing and then turns steady on if the
testing is successful. A
LAN
LED turns on if a LAN port is properly connected.
RESET
You only need to use this button if you’ve forgotten the Prestige’s password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc.; see your
User’s Guide
for details).