manualshive.com logo in svg

ZyXEL Communications PMG5318-B20A, User Manual

Share
Download
ZyXEL Communications PMG5318-B20A User Manual Download Page 97

PMG5318-B20A User’s Guide

97

C

H A P T E R

    11

USB Services

11.1  Overview 

The GPON Device has two USB ports used to share files via a USB memory stick or a USB hard 
drive.

11.1.1  What You Can Do in this Chapter

• Use  the  File Sharing screen to configure a file-sharing server (

Section 11.2 on page 98

).

• Use  the  Account Management screen to configure user accounts (

Section 11.3 on page 99

).

11.1.2  What You Need To Know

The following terms and concepts may help as you read this chapter.

Workgroup name

This is the name given to a set of computers that are connected on a network and share resources 
such as a printer or files. Windows automatically assigns the workgroup name when you set up a 
network. 

Shares

When settings are set to default, each USB device connected to the GPON Device is given a folder, 
called a “share”. If a USB hard drive connected to the GPON Device has more than one partition, 
then each partition will be allocated a share. You can also configure a “share” to be a sub-folder or 
file on the USB device.

File Systems

A file system is a way of storing and organizing files on your hard drive and storage device. Often 
different operating systems such as Windows or Linux have different file systems. The file sharing 
feature on your GPON Device supports File Allocation Table (FAT) and FAT32. 

Common Internet File System

The GPON Device uses Common Internet File System (CIFS) protocol for its file sharing functions. 
CIFS compatible computers can access the USB file storage devices connected to the GPON Device. 
CIFS protocol is supported on Microsoft Windows, Linux Samba and other operating systems (refer 
to your systems specifications for CIFS compatibility). 

Summary of Contents for PMG5318-B20A









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands