manualshive.com logo in svg

ZyXEL Communications PMG5318-B20A, User Manual

Share
Download
ZyXEL Communications PMG5318-B20A User Manual Download Page 137

PMG5318-B20A User’s Guide

137

C

H A P T E R

      1 6

System

16.1  Overview

Use this screen to configure the GPON Device’s time and date settings.

16.1.1  What You Need to Know

The following terms and concepts may help as you read through this chapter.

General Setup and System Name

General Setup contains administrative and system-related information. System Name is for 
identification purposes. However, because some ISPs check this name you should enter your 
computer's "Computer Name". 

• In Windows 2000, click Start > Settings > Control Panel and then double-click System. Click 

the Network Identification tab and then the Properties button. Note the entry for the 
Computer name field and enter it as the System Name.

• In Windows XP, click Start > My Computer > View system information and then click the 

Computer Name tab. Note the entry in the Full computer name field and enter it as the GPON 
Device System Name.

Summary of Contents for PMG5318-B20A









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands