PM7510-R0 User’s Guide
30
C
HAPTER
10
Firmware Upgrade
10.1 Overview
This chapter explains how to upload new firmware to your Zyxel Device. You can download new
firmware releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device’s
performance.
Only use firmware for your device’s specific model. Refer to the label on
the bottom of your Zyxel Device.
10.2 Firmware
Click
Maintenance > Firmware Upgrade
to open the following
screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the Zyxel Device while firmware upload is in progress.
Figure 18
Maintenance > Firmware Upgrade
The following table describes the labels on this screen. After you see the firmware updating screen, wait
two minutes before logging into the Zyxel Device again.
Table 15 Maintenance > Firmware Upgrade
LABEL
DESCRIPTION
Upgrade Firmware
Current
Firmware
Version
This is the present firmware version.
File Path
Click
Choose File
and navigate to the location of the .bin file you want to upload. Remember
that you must decompress compressed (.zip) files before you can upload them.
Upload
Click this to begin the upload process. This process may take up to two minutes.
