Chapter 4 HomeGrid Network Setup Tutorial
PLA6456 User’s Guide
31
Figure 18
Adding a New Adapter
3
Type the password for your existing network in the
Pairing password
field (
C
). Then click
PAIR
(
D
).
4
Your new adapter will now have the same
Domain Name
as your existing network and so has now
joined your existing network.
5
Connect the adapter to the device you want to add to the network, for example, your Internet
refrigerator in the kitchen.
6
Plug the adapter’s power cord into a power outlet and, if required, switch the power outlet on.
7
Repeat this procedure for all additional PLAs that you want to add to your existing or new HomeGrid
network.
4.5 Setting Up a New Network with a New PLA
This section shows you how to use your new PLAs to set up a new HomeGrid network separate to your
existing network.
The figure below shows two HomeGrid networks in a house. The first network (
1
) shows the home
computer connected to a printer and access to the Internet. The second network (
2
) has no Internet
access but with a media adapter such as the Zyxel DMA-1100P you can use your TV to watch movies
and play games which are stored on a computer.
A
B
C
D
Summary of Contents for PLA6456
Page 6: ...6 PART I User s Guide...
Page 15: ...15 PART II Technical Reference...
