Chapter 3 Web Configurator
PLA6456 User’s Guide
25
Figure 12
Multicast Screen
The following table describes the labels in this screen.
Table 9 Multicast Screen
LABEL
DESCRIPTION
Multicast Configuration
IGMP Snooping
Select
YES
to allow the
PLA
to learn multicast group. Otherwise, select
NO
to disable it.
MLD Snooping
Select
YES
to allow the
PLA
to discover the presence of MLD (Multicast Listener Discovery)
members who wish to receive multicast packets. Otherwise, select
NO
to disable it.
IGMP/MLD
broadcast report
This field is only available when
IGMP Snooping
is
YES
.
Select
NO
to drop IGMP/MLD reports until a multicast member is discovered. Then the reports
are sent to the member.
Select
YES
to have the
PLA send
IGMP/MLD reports according to the next field.
IGMP/MLD
broadcast report
mode
This field is only available when
IGMP/MLD broadcast report
is
YES
.
• Select
0
to allow the
PLA to send
IGMP/MLD reports even when the video source is
unknown.
• Select
1
to allow the
PLA
to always send IGMP/MLD reports.
• Select
2
to allow the
PLA to send
IGMPv3 IGMP/MLD reports even when the video source is
unknown.
Filter unknown
multicast traffic
Select
YES
to allow the PLA to listen to multicast traffic on networks defined by multicast groups
only. Otherwise, select
NO
to disable it.
IGMP Multicast
ranges
Up to 4 multicast IP address ranges can be configured defining the minimum and maximum IP
addresses of each range. Only multicast traffic within these ranges will be processed by the
PLA
.
This field is only available when
IGMP Snooping
is
NO
.
Click
Ok
for the changes to take effect.
Broadcast suppression
Summary of Contents for PLA6456
Page 6: ...6 PART I User s Guide...
Page 15: ...15 PART II Technical Reference...
