ZyXEL Communications P8802T, User Manual

Page: 82 / 278

Chapter 4 WAN
Basic Home Station VDSL2 P8802T User’s Guide
82
The following table describes the fields in this screen.
4.3.1 Layer-2 PTM Interface Configuration
Click the Add button in the Layer2 Interface: PTM screen to open the following screen. Use this
screen to create a new layer-2 interface.
Figure 19
DSL PTM Interface Configuration
Table 15
Layer-2 Interface: PTM
LABEL DESCRIPTION
Interface The name of a configured layer-2 interface.
DSL Latency This displays whether the ATM interface uses interleave delay (Path1) or fast mode with
no interleave delay (Path0).
PTM Priority This does not apply at the time of writing.
Conn Mode This shows the connection mode of the layer-2 interface.
IP QoS This displays whether QoS (Quality of Service) is enabled on the interface.
Remove Select an interface and click the Remove button to delete it. You cannot remove a layer-
2 interface when a WAN service is associated with it.
Add Click this button to create a new ATM layer-2 interface.