ZyXEL Communications P-974H - V3.70, Manual

Page: 44 / 116

Chapter 4 Basic
P-974H/HW Series User’s Guide
44
4.2 DHCP
Click Basic > DHCP to display the configuration screen. Use this screen to
configure DHCP and IP address settings on the LAN.
Figure 9 Basic: DHCP
The following table describes the labels in this screen.
Table 10 Basic: DHCP
LABEL DESCRIPTION
DHCP
DHCP Server
Select Yes to set the ZyXEL Device as a DHCP server. Otherwise, select
No.
DHCP Server IP Enter the LAN IP address of the ZyXEL Device in the fields provided.
DHCP Server
Mask
Enter the subnet mask associated with the LAN IP address.
Starting Local
Address Specify the first of the contiguous addresses in the IP address pool.
DHCP Pools Specify the number of IP addresses that the ZyXEL Device will give out
to DHCP clients.
Lease Time Specify the time (in minutes between 1 and 71582788) a DHCP client is
allowed to use an assigned IP address. When the lease time expires,
the DHCP client is given a new, unused IP address.
Apply Click Apply to save the settings.