ZyXEL Communications P-873HNU-51B, User Manual

Page: 62 / 339

Chapter 5 Network Map and Status Screens
P-873HNU(P)-51B User’s Guide
62
DHCP This field displays what DHCP services the VDSL Router is providing to the LAN.
Choices are:
Server - The VDSL Router is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The VDSL Router acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
None - The VDSL Router is not providing any DHCP services to the LAN.
WLAN Information
MAC Address This shows the wireless adapter MAC (Media Access Control) Address of your
device.
Status This displays whether WLAN is activated.
Name (SSID) This is the descriptive name used to identify the VDSL Router in a wireless LAN.
Channel This is the channel number used by the VDSL Router now.
Security Mode This displays the type of security mode the VDSL Router is using in the wireless
LAN.
802.11 Mode This displays the type of 802.11 mode the VDSL Router is using in the wireless
LAN.
WPS This displays whether WPS is activated.
Interface Status
Interface This column displays each interface the VDSL Router has.
Status This field indicates whether or not the VDSL Router is using the interface.
For the LAN interfaces, the Ethernet WAN interface, or the HPNA interface, this
field displays Up when the VDSL Router is using the interface and NoLink when
the line is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or InActive
when WLAN is disabled.
For the DSL interface, this field displays NoLink (line is down), Up (line is up or
connected) if you're using Ethernet encapsulation and NoLink (line is down), Up
(line is up or connected), Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE encapsulation.
Rate For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission
rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN
is enabled or N/A when WLAN is disabled.
System Status
System Up
Time
This field displays how long the VDSL Router has been running since it last
started up. The VDSL Router starts up when you plug it in, when you restart it
(Maintenance > Reboot), or when you reset it.
Current Date/
Time
This field displays the current date and time in the VDSL Router. You can change
this in Maintenance> Time Setting.
System Resource
Table 5
Status Screen (continued)
LABEL DESCRIPTION