ZyXEL Communications P-873HNU-51B, User Manual

Page: 124 / 339

Chapter 8 Home Networking
P-873HNU(P)-51B User’s Guide
124
The following table describes the fields in this screen.
8.8 The HPNA Screen
Click Network Settings > Home Networking > HPNA to open this screen. Use this screen to
enable or disable the HPNA port. See
Chapter 1 on page 19 for more information on HPNA.
Figure 44
Network Settings > Home Networking > HPNA
The following table describes the fields in this screen.
8.9 The 5th Ethernet Port Screen
If you are using DSL connection, you can configure your Ethernet WAN port as an extra LAN port.
This fifth Ethernet port provides faster speed since it is a Gigabit port. Click Network Settings >
Home Networking > 5th Ethernet Port to open this screen.
Figure 45
Network Settings > Home Networking > 5th Ethernet Port
Table 27
Network Settings > Home Networking > STB Vendor ID
LABEL DESCRIPTION
Vendor ID 1 ~ 5 Enter the STB’s vendor ID.
Apply Click Apply to save your changes back to the VDSL Router.
Cancel Click Cancel to exit this screen without saving.
Table 28
Network Settings > Home Networking > HPNA
LABEL DESCRIPTION
State Select Enable to activate the HPNA port on the VDSL Router.
Apply Click Apply to save your changes back to the VDSL Router.
Cancel Click Cancel to exit this screen without saving.