ZyXEL Communications P-870HW-I Series, User Manual

Page: 267 / 438

P-870HW-I1 User’s Guide
Chapter 25 Internet Access Setup 267
C
H A P T E R
25
Internet Access Setup
Use this menu to set up your Internet connection. See Chapter 7 on page 119 and Chapter 10
on page 137 for background information. To open this menu, enter 4 in the main menu.
Figure 164 Menu 4: Internet Access Setup
The following table describes the labels in this menu.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
My Login= hello
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Table 122 Menu 4: Internet Access Setup
FIELD DESCRIPTION
ISP’s Name Enter the name of the ISP.
Encapsulation Select the type of encapsulation your ISP uses. If you select PPPoE and then
save your changes, the ZyXEL Device asks you if you want to test the settings.
The next fields are only available if your ISP uses PPPoE encapsulation.
My Login Enter the user name provided by your ISP.
My Password Enter the password provided by your ISP.
Retype to Confirm Enter the password again.
Idle Timeout Enter the number of seconds the ZyXEL Device should wait while there is no
Internet traffic before it automatically disconnects from the ISP. Enter a time
interval between 10 and 9999 seconds.
IP Address
Assignment
Select Dynamic if your ISP did not give you a fixed (static) IP address. Select
Static if your ISP gave you a fixed (static) IP address. The next three fields are
not available if you select Dynamic .
IP Address Enter the fixed (static) IP address provided by your ISP.
IP Subnet Mask This field is not available if your ISP uses PPPoE encapsulation. Enter the
subnet mask provided by your ISP.