ZyXEL Communications P-870HW-I Series, User Manual

Page: 205 / 438

P-870HW-I1 User’s Guide
Chapter 16 Remote MGMT 205
C
H A P T E R
16
Remote MGMT
Use these screens to control which computers can use which services to access the ZyXEL
Device on each interface.
16.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:
LAN includes WLAN. To disable remote management of a service, select Disable in the
corresponding Server Access field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1
Telnet
2 HTTP
16.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1 A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet,
FTP or Web service.
2 You have disabled that service in one of the remote management screens.
3
The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL Device will disconnect the session immediately.
4
There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
• Internet (WAN only) • ALL (LAN and WAN)
• LAN only • Neither (Disable).