ZyXEL Communications P-870HW-I Series User Manual Download Page 135

Page: 135 / 438

P-870HW-I1 User’s Guide

Chapter 9 DHCP Server

135

9.3 Static DHCP Screen

Use this screen to assign static IP address to specific computers. To open this screen, click

Network > DHCP Server > Static DHCP

Figure 72

Network > DHCP Server > Static DHCP

The following table describes the labels in this screen.

First DNS Server
Second DNS

Server
Third DNS Server

Specify the IP addresses of a maximum of three DNS servers that the network can

use. The ZyXEL Device provides these IP addresses to DHCP clients. You can

specify these IP addresses the following ways:

From ISP

- use the IP address of the corresponding DNS server specified in

Network > WAN > Advanced

User-Defined

- enter a static IP address.

DNS Relay

- use the ZyXEL Device’s IP address. In this case, the ZyXEL Device

finds out the IP address of the DNS server (based on RFC 1877). Then, it forwards

DNS queries from DHCP clients to this server and sends the response back to the

DHCP clients.

None

- there is no second or third DNS server.

Apply

Click this to save your changes back to the ZyXEL Device.

Reset

Click this

to reload the previous configuration for this screen.

Table 55

Network > DHCP Server > General (continued)

LABEL

DESCRIPTION

Table 56

DHCP Setup

LABEL

DESCRIPTION

This field is a sequential value.

MAC Address

Enter the MAC address of the computer to which you want to assign a static IP

address.

Summary of Contents for P-870HW-I Series























































































































































































































































































































































































































































Search results

Summary of Contents for P-870HW-I Series

Reviews:

ZyXEL Communications P-870HW-I Series, User Manual, Page: 135 / 438

Search results

Summary of Contents for P-870HW-I Series

Reviews: