ZyXEL Communications P-861H-G1, User Manual, Page: 270 / 341

Prestige 861H Series User’s Guide
269 Chapter 32 VDSL Commands
Figure 178 vdsl pvc list Command Example
P861H> vdsl pvc list
==================================== PVC ====================================
pvc act vpivci qos pcr cdvt scr mbs app ether encap ip
-----------------------------------------------------------------------------
0 Y 835 vbrnr 4830 1 604 32 data 3 4 ENET IP
1 Y 032 vbrrt 360 1 360 32 mdware 1 2 1483 BDG
2 Y 132 cbr 360 1 NA NA igmp 1 2 1483 BDG
3 Y 133 cbr NA NA NA NA video 1 2 1483 BDG
4 Y 134 cbr NA NA NA NA video 1 2 1483 BDG
5 Y 135 cbr NA NA NA NA video 1 2 1483 BDG
6 Y 136 cbr NA NA NA NA video 1 2 1483 BDG
=============================================================================
P861H>
The following table explains these parameters.
Table 85
PVC List
PARAMETER DESCRIPTION
pvc This displays the Permanent Virtual Circuit (PVC) index number.
act This displays whether this PVC is active or not.
vpi/vci This displays the Virtual Path Identifier and Virtual Channel Identifier.
qos This displays the ATM QoS type.
pcr This displays the maximum rate at which the sender can send cells (cells per
second).
cdvt This displays the acceptable range of the Cell Delay Variation (cells per
second).
scr This displays the mean cell rate of each bursty traffic source (cells per
second).
mbs This displays the maximum number of cells that can be sent to the PCR (cells
per second).
app This displays the name of an application on a PVC.
ether This displays which Ethernet port a PVC can use.
encap This displays the method of encapsulation used by your ISP. Choices vary
depending on the operating mode of each remote node.
If the operating mode is set as a bridge, this field displays either
PPPoA or
RFC 1483 .
If the operating mode is set as routing, this field displays PPPoA , RFC 1483 ,
ENET ENCAP or PPPoE .
ip This field displays whether the remote node is configured as a router (IP) or as
a bridge (BDG).
32.6.4 Activate the VDSL Current Port Profile
Syntax:
vdsl profile actv