ZyXEL Communications P-861H-G1, User Manual, Page: 227 / 341

Prestige 861H Series User’s Guide
Chapter 25 System Maintenance 226
C
H A P T E R
25
System Maintenance
This chapter leads you through SMT menus 24.8 to 24.10.
25.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from
Menu 24 —
System Maintenance . A list of valid commands can be found by typing
help
or
?
at the
command prompt. Type “
exit
” to return to the SMT main menu when finished.
Figure 152 Command Mode in Menu 24
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:
Figure 153 Valid Commands
P861H> ?
Valid commands are:
sys exit ether wan
ip bridge vdsl
P861H>