ZyXEL Communications P-861H-G1, User Manual, Page: 162 / 341

Prestige 861H Series User’s Guide
161 Chapter 17 Remote Node Configuration
Figure 87 Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation)
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
17.5 Editing ATM Layer Options
Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options .
In menu 11.1, move the cursor to the Edit ATM Options field and then press
[SPACE BAR]
to select Yes . Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options .
17.5.1 LLC-based Multiplexing or PPP Encapsulation
For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with
protocol identifying information being contained in each packet header.
Figure 88 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
VPI #= 8
VCI #= 35
ATM QoS Type= VBR-nRT
PCR= 4830
CDVT= 1
SCR= 604
MBS= 32
Application Type= Data
Ethernet Port 1= No
Ethernet Port 2= No
Ethernet Port 3= Yes
Ethernet Port 4= Yes
Enter here to CONFIRM or ESC to CANCEL:
In this case, only one set of VPI and VCI numbers need be specified for all protocols. The
valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local
management of ATM traffic).