manualshive.com logo in svg

ZyXEL Communications P-861H-G1, User Manual, Page: 131 / 341

Share
Download
ZyXEL Communications P-861H-G1 User Manual Download Page 131

Prestige 861H Series User’s Guide

Chapter 12 Maintenance

130

Figure 63   

Error Message

12.6  Configuration Screen

Click 

Maintenance

, and then the 

Configuration

 tab. Links to backup configuration, restoring 

configuration, and factory defaults appear as shown next.

Figure 64   

Maintenance Configuration

12.6.1  Backup Configuration

Backup configuration allows you to back up (save) the Prestige’s current configuration to a 
file on your computer. Once your Prestige is configured and functioning properly, it is highly 
recommended that you back up your configuration file before making configuration changes. 
The backup configuration file will be useful in case you need to return to your previous 
settings. 

Click 

Backup

 to save the Prestige’s current configuration to your computer

Summary of Contents for P-861H-G1






















































































































































































































































































































































Reviews:

No comments