background image

Prestige 794M User’s Guide

33 

Chapter 2 The Web Configurator 

2.7.4  Email Status  

The 

Email Status

 screen shows the current E-mail account information (that you configured 

in the 

Check Email

 screen). You can also check your Email account status in this screen. 

Click 

Status

 and 

Email

 

Status

 in the navigation panel.

Figure 14   

Status: Email Status  

The following table describes the labels in this screen. 

2.7.5  Event Log  

Use the 

Event Log

 screen to view system logs (such as when an SHDSL connection is up). 

Click 

Status

 and 

Event Log

 in the navigation panel to display the screen as shown next. 

Note: 

To display and log firewall events, enable firewall event logging in the 

Firewall 

Log

 screen.  

Table 9   

Status: Email Status 

LABEL

DESCRIPTION

Email Account

Account Name

This field displays the E-mail account user name. 

POP3 Mail Server This field displays the IP address or domain name of a POP3 mail server. 

Email Status

This field displays the status of this mail account. 

Reset Status

This button is available when you enable this E-mail account. 
Click 

Reset Status

 to reset the status. 

Check Now

This button is available when you enable this E-mail account. 
Click 

Check Now 

to check for any new mail(s) on the mail server.  

Note: 

You need to use an E-mail program (such as Microsoft 
Outlook or Netscape Composer) to retrieve and view E-
mails. 

Summary of Contents for P-794M
























































































































Reviews: