Prestige 794M User’s Guide
Chapter 2 The Web Configurator
30
The following table describes the labels in this screen.
2.7 Routing Table
The routing table contains the route information to the network(s) that the Prestige can reach.
The Prestige automatically updates the routing table with the RIP information received from
other Ethernet devices.
Click
Status
and
Routing
Table
in the navigation panel to display the
Routing Table
screen.
Figure 10
Status: Routing Table
The following table describes the labels in this screen.
Table 4
Status: ARP Table
LABEL
DESCRIPTION
IP Address
This is the learned IP address of a device connected to a switch port with
corresponding MAC address below.
MAC Address
This is the MAC address of the device with corresponding IP address above.
Interface
This is the interface name on the Prestige to which a device is connected.
Static
This shows whether the MAC address is dynamic (learned by the Prestige) or
static (manually entered).
Table 5
Status: Routing Table
LABEL
DESCRIPTION
Routing Table
Valid
This field indicates whether a routing status is successful.
Destination
This field displays the IP address of a destination network.
Netmask
This field displays the subnet mask of a destination network.
Gateway/Interface
This field displays the IP address of a gateway or the interface name on the
Prestige this route uses.
Cost
This field displays the cost (or hope count) for this route.
RIP Routing Table
Destination
This field displays the IP address of a destination network.
Netmask
This field displays the subnet mask of a destination network.
