background image

P-661H/HW Series User’s Guide

54

Chapter 2 Introducing the Web Configurator

2.4.4  Status: WLAN Status (Wireless devices only)

Click 

WLAN Status

 in the 

Status

 screen to open this screen. Use this screen to view the 

wireless stations that are currently associated to the ZyXEL Device.

Figure 12   

Status: WLAN Status

The following table describes the labels in this screen.

2.4.5  Status: VPN Status

Click the 

VPN Status

 hyperlink in the 

Status

 screen. The 

VPN Status

 shows the current 

status of any VPN tunnels the ZyXEL Device has negotiated.

MAC Address

This field displays the MAC (Media Access Control) address of the computer with the 

displayed IP address.
Every Ethernet device has a unique MAC address. The MAC address is assigned at 

the factory and consists of six pairs of hexadecimal characters, for example, 

00:A0:C5:00:00:02.

Refresh

Click 

Refresh

 to update this screen.

Table 5   

Status: Any IP Table (continued)

LABEL 

DESCRIPTION

Table 6   

Status: WLAN Status

LABEL 

DESCRIPTION

This is the index number of an associated wireless station. 

MAC Address

This field displays the MAC (Media Access Control) address of an associated wireless 

station.

Association 

Time

This field displays the time a wireless station first associated with the ZyXEL Device.

Refresh

Click 

Refresh

 to reload this screen.

Summary of Contents for P-661H Series
































































































































































































































































































































































































Reviews: