ZyXEL Communications P-661H-61, Manual

Page: 50 / 404

Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
50
6
Click Start or Apply in the other device’s utility screen within two minutes of
clicking Register in the ZyXEL Device web configurator screen.
7
The ZyXEL Device and the other WPS-enabled device establish a secure
connection. This can take up to two minutes.
8
Your computer is now ready to connect to the Internet wirelessly through your
ZyXEL Device.
Note: You must repeat this procedure for every device you want to add to your
network using WPS.
3.4 Setting Up NAT Port Forwarding
In this tutorial, you manage the Doom server on a computer behind the ZyXEL
Device. In order for players on the Internet (like A in the figure below) to
communicate with the Doom server, you need to configure the port settings and IP
address on the ZyXEL Device. Traffic should be forwarded to the port 666 of the
Doom server computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
You may set up the port settings by configuring the port settings for the Doom
server computer (see
Chapter 11 on page 190 for more information).
1
Click Network Setting > NAT > Port Forwarding. Click Add new rule.
D =192.168.1.34
WAN
LAN
port 666
A