ZyXEL Communications P-661H-61, Manual, Page: 115 / 404

Chapter 6 Wireless
P-661HNU-Fx User’s Guide
115
6.2.1 No Security
Select No Security to allow wireless stations to communicate with the access
points without any data encryption or authentication.
Mode Select This makes sure that only compliant WLAN devices can associate with the
ZyXEL Device.
Select 802.11b/g/n to allow IEEE802.11b, IEEE802.11g and
IEEE802.11n compliant WLAN devices to associate with the ZyXEL Device.
The transmission rate of your ZyXEL Device might be reduced.
Select 802.11b/g to allow both IEEE802.11b and IEEE802.11g compliant
WLAN devices to associate with the ZyXEL Device. The transmission rate
of your ZyXEL Device might be reduced.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices
to associate with the ZyXEL Device. Select 802.11n only in 2.4G band
to allow only IEEE 802.11n compliant WLAN devices with the same
frequency range (2.4 GHz) to associate with the ZyXEL Device.
Channel
Selection Set the channel depending on your particular region.
Select a channel or use Auto to have the ZyXEL Device automatically
determine a channel to use. If you are having problems with wireless
interference, changing the channel may help. Try to use a channel that is
as many channels away from any channels used by neighboring APs as
possible. The channel number which the ZyXEL Device is currently using
then displays in the Operating Channel field.
Scan Click this button to have the ZyXEL Device immediately scan for and select
a channel (which is not used by another device) whenever the device
reboots or the wireless setting is changed.
Operating
Channel This is the channel currently being used by your AP.
Security Level
Security
Mode
Select Basic or More Secure to add security on this wireless network.
The wireless clients which want to associate to this network must have
same wireless security settings as the ZyXEL Device. When you select to
use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this
network without any data encryption or authentication.
See the following sections for more details about wireless security modes.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to restore your previously saved settings.
Table 12 Network > Wireless LAN > General (continued)
LABEL DESCRIPTION