ZyXEL Communications P-660N-T1A, User Manual

Page: 198 / 322

Chapter 18 CWMP
P-660HN-T1A User’s Guide
198
18.2 The CWMP Setup Screen
Use this screen to configure your ZyXEL Device to be managed by a management
server. Click
Advanced > CWMP to display the following screen.
Figure 98 Advanced > CWMP
The following table describes the fields in this screen.
Table 69 Advanced > CWMP
LINK DESCRIPTION
CWMP Setup
CWMP
Select Activated to allow the ZyXEL Device to be managed by a
management server or select Deactivated to not allow the ZyXEL Device
to be managed by a management server.
Login ACS Configure this part of the screen to log into the management server.
URL Type the IP address or domain name of the management server. If the
ZyXEL Device is behind a NAT router that assigns it a private IP address,
you will have to configure a NAT port forwarding rule on the NAT router.
User Name The user name is used to authenticate the ZyXEL Device when making a
connection to the management server. This user name on the management
server and the ZyXEL Device must be the same. Type a user name of up to
255 printable characters found on an English-language keyboard. Spaces
and characters such as @#$%^&*()_+ are allowed.