ZyXEL Communications P-660N-T1A, User Manual

Page: 131 / 322

P-660N-T1A User’s Guide
131
C
H A P T E R
9
Network Address Translation
(NAT)
9.1 Overview
This chapter discusses how to configure NAT on the ZyXEL Device. NAT (Network
Address Translation - NAT, RFC 1631) is the translation of the IP address of a host
in a packet, for example, the source address of an outgoing packet, used within
one network to a different IP address known within another network.
9.1.1 What You Can Do in the NAT Screens
• Use the General screen ( Section 9.2 on page 133 ) to configure the NAT setup
settings.
• Use the Port Forwarding screen ( Section 9.3 on page 134 ) to configure
forward incoming service requests to the server(s) on your local network.
• Use the Address Mapping screen ( Section 9.4 on page 138 ) to change your
ZyXEL Device’s address mapping settings.
• Use the ALG screen ( Section 9.5 on page 141 ) to enable and disable the SIP
(VoIP) ALG in the ZyXEL Device.
9.1.2 What You Need To Know
The following terms and concepts may help as you read this chapter.
Inside/Outside
Inside/outside denotes where a host is located relative to the ZyXEL Device, for
example, the computers of your subscribers are the inside hosts, while the web
servers on the Internet are the outside hosts.
Global/Local
Global/local denotes the IP address of a host in a packet as the packet traverses a
router, for example, the local address refers to the IP address of a host when the