ZyXEL Communications P-660HWP-D1, User Manual

Page: 285 / 374

Chapter 21 Tools
P-660HWP-D1 User’s Guide
285
Figure 165 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default P-660HWP-D1 IP address
(192.168.1.1). See the appendix for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click
Return to go back to
the Configuration screen.
Figure 166 Configuration Restore Error
21.2.3 Back to Factory Defaults
Pressing the RESET button in this section clears all user-entered configuration information
and returns the P-660HWP-D1 to its factory defaults.
You can also press the
RESET button on the rear panel to reset the factory defaults of your P-
660HWP-D1. Refer to the chapter about introducing the web configurator for more
information on the
RESET button.
21.3 Restart
System restart allows you to reboot the P-660HWP-D1 without turning the power off.
Click
Maintenance > Tools > Restart . Click Restart to have the P-660HWP-D1 reboot. This
does not affect the P-660HWP-D1's configuration.
Figure 167 Restart Screen