ZyXEL Communications P-660HWP-D1, User Manual

Page: 213 / 374

Chapter 14 Static Route
P-660HWP-D1 User’s Guide
213
Figure 122 Static Route Edit
The following table describes the labels in this screen.
Table 84 Static Route Edit
LABEL DESCRIPTION
Active This field allows you to activate/deactivate this static route.
Route Name Enter the name of the IP static route. Leave this field blank to delete this static
route.
Destination IP
Address
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host,
use a subnet mask of 255.255.255.255 in the subnet mask field to force the network
number to be identical to the host ID.
IP Subnet Mask Enter the IP subnet mask here.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes to the P-660HWP-D1.
Cancel Click Cancel to begin configuring this screen afresh.