ZyXEL Communications P-660HWP-D1, User Manual

Page: 149 / 374

P-660HWP-D1 User’s Guide
149
C
H A P T E R
10
Firewalls
This chapter gives some background information on firewalls and introduces the P-660HWP-
D1 firewall.
10.1 Firewall Overview
Originally, the term firewall referred to a construction technique designed to prevent the
spread of fire from one room to another. The networking term “firewall” is a system or group
of systems that enforces an access-control policy between two networks. It may also be
defined as a mechanism used to protect a trusted network from an untrusted network. Of
course, firewalls cannot solve every security problem. A firewall is
one of the mechanisms
used to establish a network security perimeter in support of a network security policy. It
should never be the
only mechanism or method employed. For a firewall to guard effectively,
you must design and deploy it appropriately. This requires integrating the firewall into a broad
information-security policy. In addition, specific policies must be implemented within the
firewall itself.
Refer to
Section 11.5 on page 164 to configure default firewall settings.
Refer to Section 11.6 on page 165 to view firewall rules.
Refer to Section 11.6.1 on page 167 to configure firewall rules.
Refer to Section 11.6.2 on page 170 to configure a custom service.
Refer to Section 11.10.3 on page 179 to configure firewall thresholds.
10.2 Types of Firewalls
There are three main types of firewalls:
• Packet Filtering Firewalls
• Application-level Firewalls
• Stateful Inspection Firewalls
10.2.1 Packet Filtering Firewalls
Packet filtering firewalls restrict access based on the source/destination computer network
address of a packet and the type of application.