manualshive.com logo in svg

ZyXEL Communications P-660HN-TxA, User Manual

Share
Download
ZyXEL Communications P-660HN-TxA User Manual Download Page 183

 Chapter 16 Remote Management

P-660HN-TxA User’s Guide

183

Remote Management and NAT

When NAT is enabled:

• Use the ZyXEL Device’s WAN IP address when configuring from the WAN. 
• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.

 System Timeout

There is a default system management idle timeout of five minutes (three 
hundred seconds). The ZyXEL Device automatically logs you out if the 
management session remains idle for longer than this timeout period. The 
management session does not time out when a statistics screen is polling. 

16.2  The WWW Screen

Use this screen to specify how to connect to the ZyXEL Device from a web 
browser, such as Internet Explorer. 

Note: If you disable the

 WWW

 service in the 

Remote MGMT > WWW

 screen, then 

the ZyXEL Device blocks all HTTP connection attempts.

16.2.1  Configuring the WWW Screen

Click Advanced > Remote MGMT to display the WWW screen.

Figure 89   

Advanced > Remote MGMT > WWW

Summary of Contents for P-660HN-TxA





































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands