ZyXEL Communications P-660HN-F1A, User Manual

Page: 281 / 430

Chapter 18 Remote Management
P-660HN-F1A User’s Guide
281
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 121 Advanced > Remote Management > Telnet
The following table describes the labels in this screen.
18.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the P-660HN-
F1A’s firmware and configuration files. Please see the User’s Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
Table 85 Advanced > Remote Management > Telnet
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Access Status Select the interface(s) through which a computer may access the P-
660HN-F1A using this service.
Secured Client
IP A secured client is a “trusted” computer that is allowed to communicate
with the P-660HN-F1A using this service.
Select All to allow any computer to access the P-660HN-F1A using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the P-660HN-F1A using this service.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.