ZyXEL Communications P-660HN-F1A User Manual Download Page 259

Page: 259 / 430

Chapter 16 Quality of Service (QoS)

P-660HN-F1A User’s Guide

259

Active

Select the check box to enable this classifier.

Name

This is the name of the classifier.

Interface

This shows the interface from which traffic of this classifier should
come.

Priority

This is the priority assigned to traffic of this classifier.

Filter Content

This shows criteria specified in this classifier.

Modify

Click the Edit icon to go to the screen where you can edit the classifier.

Click the Remove icon to delete an existing classifier.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Table 75

Advanced > QoS > Class Setup (continued)

LABEL

DESCRIPTION

Summary of Contents for P-660HN-F1A















































































































































































































































































































































































































































Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-660HN-F1A, User Manual

Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands