ZyXEL Communications P-660HN-F1A, User Manual

Page: 243 / 430

Chapter 15 802.1Q/1P
P-660HN-F1A User’s Guide
243
15.1.3 802.1Q/1P Example
This example shows how to configure the 802.1Q/1P settings on the P-660HN-
F1A.
802.1Q/1P Example
LAN1 and LAN2 are connected to ATAs (Analogue Telephone Adapters) and used
for VoIP traffic. You want to create high priority for this type of traffic, so you want
to group these ports into one VLAN (VLAN2) and then to a PVC (PVC1) where the
priority is set to high level of service.
You would start with the following steps.
1
Click Advanced > 802.1Q/1P > Group Setting, and then click the Edit button
to display the following screen.
2
In the Name field type VoIP to identify the group.
3
In the VLAN ID field type in 2 to identify the VLAN group.
4
Select PVC1 from the Default Gateway drop-down list box.
5
In the Control field, select Fixed for LAN1, LAN2 and PVC1 to be permanent
members of the VLAN group.
1
2
3
4
1
2
3
4
5
6
7
8
VoIP Network
Internet - (PPPoE)
Internet - (PPPoE)
P-660HN-F1A