ZyXEL Communications P-660HN-F1A User Manual Download Page 24

Page: 24 / 430

Chapter 1 Introducing the P-660HN-F1A

P-660HN-F1A User’s Guide

• Command Line Interface. Line commands are mostly used for troubleshooting

by service engineers.

• FTP for firmware upgrades and configuration backup/restore.
• TR-069. This is an auto-configuration server used to remotely configure your

device.

• TR-064. DSL CPE (acting as a gateway) installation and configuration through

software on computers on the LAN.

1.3 Good Habits for Managing the P-660HN-F1A

Do the following things regularly to make the P-660HN-F1A more secure and to
manage the P-660HN-F1A more effectively.

• Change the password. Use a password that’s not easy to guess and that consists

of different types of characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it).

Restoring an earlier working configuration may be useful if the device becomes

unstable or even crashes. If you forget your password, you will have to reset the

P-660HN-F1A to its factory default settings. If you backed up an earlier

configuration file, you would not have to totally re-configure the P-660HN-F1A.

You could simply restore your last configuration.

1.4 Applications for the P-660HN-F1A

Here are some example uses for which the P-660HN-F1A is well suited.

Summary of Contents for P-660HN-F1A















































































































































































































































































































































































































































Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-660HN-F1A, User Manual

Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands