![ZyXEL Communications P-660HN-F1A User Manual Download Page 161](http://html1.mh-extra.com/html/zyxel-communications/p-660hn-f1a/p-660hn-f1a_user-manual_944065161.webp)
Chapter 8 Wireless LAN
P-660HN-F1A User’s Guide
161
numerous channels. This allows a variety of networks to exist in the same place
without interfering with one another. When you create a network, you must select
a channel to use.
Since the available unlicensed spectrum varies from one country to another, the
number of available channels also varies.
8.7.2 Additional Wireless Terms
The following table describes some wireless network terms and acronyms used in
the P-660HN-F1A’s Web Configurator.
8.7.3 Wireless Security Overview
By their nature, radio communications are simple to intercept. For wireless data
networks, this means that anyone within range of a wireless network without
security can not only read the data passing over the airwaves, but also join the
network. Once an unauthorized person has access to the network, he or she can
steal information or introduce malware (malicious software) intended to
compromise the network. For these reasons, a variety of security systems have
been developed to ensure that only authorized people can use a wireless data
network, or understand the data carried on it.
Table 42
Additional Wireless Terms
TERM
DESCRIPTION
RTS/CTS Threshold
In a wireless network which covers a large area, wireless devices
are sometimes not aware of each other’s presence. This may cause
them to send information to the AP at the same time and result in
information colliding and not getting through.
By setting this value lower than the default value, the wireless
devices must sometimes get permission to send information to the
P-660HN-F1A. The lower the value, the more often the devices must
get permission.
If this value is greater than the fragmentation threshold value (see
below), then wireless devices never have to get permission to send
information to the P-660HN-F1A.
Preamble
A preamble affects the timing in your wireless network. There are
two preamble modes: long and short.
If a device uses a different
preamble mode than the P-660HN-F1A does, it cannot communicate
with the P-660HN-F1A.
Authentication
The process of verifying whether a wireless device is allowed to use
the wireless network.
Fragmentation
Threshold
A small fragmentation threshold is recommended for busy networks,
while a larger threshold provides faster performance if the network
is not very busy.
Summary of Contents for P-660HN-F1A
