ZyXEL Communications P-660HN-F1A, User Manual

Page: 155 / 430

Chapter 8 Wireless LAN
P-660HN-F1A User’s Guide
155
8.3.2 MAC Filter
Use this screen to change your P-660HN-F1A’s MAC filter settings. Click the Edit
button in the More AP screen. The screen appears as shown.
Figure 54 Network > Wireless LAN > More AP: MAC Filter
The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > AP: MAC Address Filter
LABEL DESCRIPTION
Active MAC
Filter Select the check box to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Deny to block access to the P-660HN-F1A. MAC addresses not listed
will be allowed to access the P-660HN-F1A
Select Allow to permit access to the P-660HN-F1A. MAC addresses not
listed will be denied access to the P-660HN-F1A.
Set This is the index number of the MAC address.
MAC
Address Enter the MAC addresses of the wireless devices that are allowed or denied
access to the P-660HN-F1A in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.