manualshive.com logo in svg

ZyXEL Communications P-660H-T1 v3s, User Manual

Share
Download
ZyXEL Communications P-660H-T1 v3s User Manual Download Page 75

 Chapter 6 WAN Setup

P-660H-T1v3s User’s Guide

75

6.2.1  Advanced Internet Access Setup 

Use this screen to edit your P-660H-T1v3s's advanced WAN settings. Click the 
Advanced Setup button in the Internet Access Setup screen. The screen 
appears as shown.

Figure 23   

Network > WAN > Internet Access Setup: Advanced Setup

The following table describes the labels in this screen.  

Table 13   

Network > WAN > Internet Access Setup: Advanced Setup

LABEL

DESCRIPTION

RIP & Multicast 
Setup

This section is not available when you configure the P-660H-T1v3s to 
be in bridge mode.

RIP Direction

RIP (Routing Information Protocol) allows a router to exchange 
routing information with other routers. Use this field to control how 
much routing information the P-660H-T1v3s sends and receives on 
the subnet.

Select the RIP direction from None, Both, In Only and Out Only.

RIP Version

This field is not configurable if you select None in the RIP Direction 
field.

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Summary of Contents for P-660H-T1 v3s

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands