ZyXEL Communications P-660H-T1 v3s, User Manual

Page: 48 / 272

Chapter 4 Tutorials
P-660H-T1v3s User’s Guide
48
3
Configure the Static Route Setup screen using the following settings:
3a
Enter a destination IP address of 192.168.10.0 and a subnet mask
255.255.255.0 for N2.
3b
Enter 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
3a
Click Apply.
Now B should be able to receive traffic from A.
4.6 Multiple Public and Private IP Address
Mappings
If your ISP gives you more than one static IP address for your Internet access,
you can map each IP address for a specific service. This tutorial assumes you are
given two static public IP addresses which you want to map to the pair of servers
labeled A and B.