ZyXEL Communications P-660H-T1 v3s, User Manual

Page: 155 / 272

Chapter 15 Remote Management
P-660H-T1v3s User’s Guide
155
The following table describes the labels in this screen.
15.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the P-660H-
T1v3s’s firmware and configuration files. Please see the User’s Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
Use this screen to specify which interfaces allow FTP access and from which IP
address the access can come. To change your P-660H-T1v3s’s FTP settings, click
Advanced > Remote MGMT > FTP. The screen appears as shown.
Figure 64 Advanced > Remote Management > FTP
Table 45 Advanced > Remote Management > Telnet
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Server Access Select the interface(s) through which a computer may access the P-
660H-T1v3s using this service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate
with the P-660H-T1v3s using this service.
Select All to allow any computer to access the P-660H-T1v3s using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the P-660H-T1v3s using this service.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.