manualshive.com logo in svg

ZyXEL Communications P-660H-T1 v3s, User Manual

Share
Download
ZyXEL Communications P-660H-T1 v3s User Manual Download Page 138

Chapter 12 802.1Q/1P

P-660H-T1v3s User’s Guide

138

12.2.1  Editing 802.1Q/1P Group Setting

Use this screen to configure the settings for each VLAN group.

In the 802.1Q/1P screen, click the Edit button from the Modify filed to display 
the following screen.

Figure 55   

Advanced > 802.1Q/1P > Group Setting > Edit

Port Number

These columns display the VLAN’s settings for each port. A tagged 
port is marked as T, an untagged port is marked as U and ports not 
participating in a VLAN are marked as “–“. 

Modify

Click the Edit button to configure the the ports in the VLAN group.

Click the Remove button to delete the VLAN group.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Table 36   

Advanced > 802.1Q/1P > Group Setting (continued)

LABEL

DESCRIPTION

Summary of Contents for P-660H-T1 v3s

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands