ZyXEL Communications P-660H-T1 v3s User Manual Download Page 123

Page: 123 / 272

Chapter 9 Firewalls

P-660H-T1v3s User’s Guide

123

9.2 The Firewall Screen

Use this screen to enable firewall and/or SPI. Click Advanced Setup > Firewall
to display the following screen.

Figure 46

Advanced Setup > Firewall

The following table describes the labels in this screen.

Enabling SPI blocks all traffic initiated from the WAN side,
including the DMZ, virtual server and ACL on the WAN side.

Table 30

Advanced > Firewall

LABEL

DESCRIPTION

Firewall

Use this field to enable or disable firewall on your P-660H-T1v3s.

SPI

Use this field to enable or disable SPI on your P-660H-T1v3s.

SAVE

Click this to save your changes.

CANCEL

Click this to restore your previously saved settings.

Summary of Contents for P-660H-T1 v3s

















































































































































































































































































Search results

Summary of Contents for P-660H-T1 v3s

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-660H-T1 v3s, User Manual

Search results

Summary of Contents for P-660H-T1 v3s

Reviews:

Brands by name

Popular brands