manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, User Manual

Share
Download
ZyXEL Communications P-2812HNU-51c User Manual Download Page 423

P-2812HNU-51c User’s Guide

423

A

P P E N D I X

   

H  

Legal Information

Copyright

Copyright © 2010 by ZyXEL Communications Corporation.

The contents of this publication may not be reproduced in any part or as a whole, 
transcribed, stored in a retrieval system, translated into any language, or 
transmitted in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, photocopying, manual, or otherwise, without the prior written 
permission of ZyXEL Communications Corporation.

Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any 
products, or software described herein. Neither does it convey any license under 
its patent rights nor the patent rights of others. ZyXEL further reserves the right 
to make changes in any products described herein without notice. This publication 
is subject to change without notice.

Your use of the P-2812HNU-51c is subject to the terms and conditions of any 
related service providers. 

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL 
Communications, Inc. Other trademarks mentioned in this publication are used for 
identification purposes only and may be properties of their respective owners.

Certifications 

Federal Communications Commission (FCC) Interference Statement

The device complies with Part 15 of FCC rules. Operation is subject to the 
following two conditions:

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands