manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, User Manual

Share
Download
ZyXEL Communications P-2812HNU-51c User Manual Download Page 409

P-2812HNU-51c User’s Guide

409

A

P P E N D I X

   

G  

Open Software Announcements

End-User License Agreement for "P-2812HNU-51c"

 

WARNING:  ZyXEL Communications Corp. IS WILLING TO 
LICENSE THE SOFTWARE TO YOU ONLY UPON THE CONDITION 
THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS 
LICENSE AGREEMENT.  PLEASE READ THE TERMS CAREFULLY 
BEFORE COMPLETING THE INSTALLATION PROCESS AS 
INSTALLING THE SOFTWARE WILL INDICATE YOUR ASSENT TO 
THEM.  IF YOU DO NOT AGREE TO THESE TERMS, THEN ZyXEL, 
IS UNWILLING TO LICENSE THE SOFTWARE TO YOU, IN WHICH 
EVENT YOU SHOULD RETURN THE UNINSTALLED SOFTWARE 
AND PACKAGING TO THE PLACE FROM WHICH IT WAS 
ACQUIRED OR ZyXEL, AND YOUR MONEY WILL BE REFUNDED.

1

Grant of License for Personal Use

ZyXEL Communications Corp. ("ZyXEL") grants you a non-exclusive, non-
sublicense, non-transferable license to use the program with which this license is 
distributed (the "Software"), including any documentation files accompanying the 
Software ("Documentation"), for internal business use only, for up to the number 
of users specified in sales order and invoice. You have the right to make one 
backup copy of the Software and Documentation solely for archival, back-up or 
disaster recovery purposes.  You shall not exceed the scope of the license granted 
hereunder. Any rights not expressly granted by ZyXEL to you are reserved by 
ZyXEL, and all implied licenses are disclaimed.

2

Ownership

You have no ownership rights in the Software.  Rather, you have a license to use 
the Software as long as this License Agreement remains in full force and effect.  
Ownership of the Software, Documentation and all intellectual property rights 
therein shall remain at all times with ZyXEL.  Any other use of the Software by any 
other entity is strictly forbidden and is a violation of this License Agreement.

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands