manualshive.com logo in svg

ZyXEL Communications P-2802H-I Series, User Manual

Share
Download
ZyXEL Communications P-2802H-I Series User Manual Download Page 306

Chapter 23 Tools

P-2802H(W)(L)-I Series User’s Guide

306

Figure 183   

Firmware Upload In Progress

The ZyXEL Device automatically restarts in this time causing a temporary network 
disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 184   

Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the 

Status

 screen.

If the upload was not successful, the following screen will appear. Click 

Return

 to go back to 

the 

Firmware

 screen.

Figure 185   

Error Message

23.5  Backup and Restore  

See 

Section 23.7 on page 309

 and 

Section 23.8 on page 312

 for transferring configuration files 

using FTP/TFTP

 

commands.

Click 

Maintenance

 

> Tools > Configuration

. Information related to factory defaults, backup 

configuration, and restoring configuration appears in this screen, as shown next.

Summary of Contents for P-2802H-I Series



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands