ZyXEL Communications P-2612HW-F1 -, User Manual

Page: 46 / 547

Chapter 3 Wizards
P-2612HW Series User’s Guide
46
• If the user name and/or password you entered for PPPoE connection are not
correct, the screen displays as shown next. Click Back to Username and
Password setup to go back to the screen where you can modify them.
Figure 13 Connection Test Failed-1
• If the following screen displays, check if your account is activated or click
Restart the Internet/Wireless Setup Wizard to verify your Internet access
settings.
Figure 14 Connection Test Failed-2.
3.3 Wireless Connection Wizard Setup
See the back panel for the ZyXEL Device’s unique wireless SSID (network name)
and WPA-PSK encryption key. Unless you want to use other wireless settings, you
can close the wizard after you configure the Internet connection.
Apply Click Apply to save your changes back to the ZyXEL Device.
Exit Click Exit to close the wizard screen without saving your changes.
Table 6 Internet Connection with DHCP (ENET ENCAP) (continued)
LABEL DESCRIPTION