ZyXEL Communications P-2612HW-F1 -, User Manual

Page: 402 / 547

Chapter 23 Logs
P-2612HW Series User’s Guide
402
User logout because of user
deassociation.
The router logged out a user who ended the
session.
User logout because of no
authentication response from
user.
The router logged out a user from which there
was no authentication response.
User logout because of idle
timeout expired.
The router logged out a user whose idle timeout
period expired.
User logout because of user
request.
A user logged out.
No response from RADIUS. Pls
check RADIUS Server.
There is no response message from the RADIUS
server, please check the RADIUS server.
Use RADIUS to authenticate user.
The RADIUS server is operating as the
authentication server.
No Server to authenticate user.
There is no authentication server to authenticate
a user.
Table 144 ACL Setting Notes
PACKET
DIRECTION
DIRECTION DESCRIPTION
(L to W) LAN to WAN ACL set for packets traveling from the LAN to the
WAN.
(W to L) WAN to LAN ACL set for packets traveling from the WAN to the
LAN.
(L to L/ZyXEL
Device) LAN to LAN/
ZyXEL Device ACL set for packets traveling from the LAN to the
LAN or the ZyXEL Device.
(W to W/ZyXEL
Device) WAN to WAN/
ZyXEL Device ACL set for packets traveling from the WAN to the
WAN or the ZyXEL Device.
Table 145 ICMP Notes
TYPE CODE DESCRIPTION
0
Echo Reply
0
Echo reply message
3
Destination Unreachable
0
Net unreachable
1
Host unreachable
2
Protocol unreachable
3
Port unreachable
4
A packet that needed fragmentation was dropped because it was set
to Don't Fragment (DF)
5
Source route failed
Table 143 802.1X Logs (continued)
LOG MESSAGE DESCRIPTION