manualshive.com logo in svg

ZyXEL Communications P-2612HW-F1 -, User Manual

Share
Download
ZyXEL Communications P-2612HW-F1 - User Manual Download Page 333

 Chapter 17 802.1Q/1P

P-2612HW Series User’s Guide

333

17.2.1  Editing 802.1Q/1P Group Setting

Use this screen to configure the settings for each VLAN group.

Summary
#

This field displays the index number of the VLAN group.

Name

This field displays the name of the VLAN group.

VID

This field displays the ID number of the VLAN group.

Port Number

These columns display the VLAN’s settings for each port. A tagged 
port is marked as T, an untagged port is marked as U and ports not 
participating in a VLAN are marked as “–“. 

Modify

Click the Edit button to configure the ports in the VLAN group.

Click the Remove button to delete the VLAN group.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Table 109   

Advanced > 802.1Q/1P > Group Setting (continued)

LABEL

DESCRIPTION

Summary of Contents for P-2612HW-F1 -




































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands