manualshive.com logo in svg

ZyXEL Communications P-2602HWLNI, User Manual, Page: 94 / 496

Share
Download
ZyXEL Communications P-2602HWLNI User Manual Download Page 94

Chapter 6 Status Screens

P-2602HWLNI User’s Guide

94

6.5  VoIP Statistics

Click 

Status > VoIP Statistics

 to access this screen. 

Figure 47   

VoIP Statistics

Each field is described in the following table.

Interface

This field displays either 

Ethernet

 (LAN ports) or 

Wireless

 (WLAN port).

Status

For the LAN ports, this field displays

 Down 

(line is down) or 

Up 

(line is up or 

connected).
For the WLAN port, it displays the transmission rate when WLAN is enabled or  

N/A

 when WLAN is disabled.

TxPkts

This field displays the number of packets transmitted on this interface.

RxPkts

This field displays the number of packets received on this interface.

Collisions

This is the number of collisions on this interfaces.

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this to apply the new poll interval you entered in the 

Poll Interval

 field 

above.

Stop

Click this button to halt the refreshing of the system statistics.

Table 20   

Packet Statistics (continued)

LABEL

DESCRIPTION

Table 21   

VoIP Statistics 

LABEL

DESCRIPTION

SIP Status

Account

This column displays each SIP account in the ZyXEL Device.

Summary of Contents for P-2602HWLNI

















































































































































































































































































































































































































































































































Reviews:

No comments