ZyXEL Communications P-2602HWLNI, User Manual, Page: 72 / 496

Chapter 3 Internet and Wireless Setup Wizard
P-2602HWLNI User’s Guide
72
Figure 24 Connection Test Successful
2 Use this screen to activate the wireless LAN and OTIST. Click Next to continue.
Figure 25 Wireless LAN Setup Wizard 1
The following table describes the labels in this screen.
Table 11 Wireless LAN Setup Wizard 1
LABEL DESCRIPTION
Active Select the check box to turn on the wireless LAN.
Enable OTIST Select the check box to enable OTIST if you want to transfer your ZyXEL
Device’s SSID and WEP or WPA-PSK security settings to wireless clients that
support OTIST and are within transmission range.
You must also activate and start OTIST on the wireless client at the same time.
The process takes three minutes to complete.
Setup Key Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to
use the same OTIST Setup Key on the ZyXEL Device and wireless clients.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.