manualshive.com logo in svg

ZyXEL Communications P-2601HN(L)-F1 Series, User Manual

Share
Download
ZyXEL Communications P-2601HN(L)-F1 Series User Manual Download Page 198

Chapter 16 VoIP

P-2601HN(L)-F1 Series User’s Guide

198

DSCP and Per-Hop Behavior 

DiffServ defines a new DS (Differentiated Services) field to replace the Type of 
Service (TOS) field in the IP header. The DS field contains a 2-bit unused field and 
a 6-bit DSCP field which can define up to 64 service levels. The following figure 
illustrates the DS field. 

DSCP is backward compatible with the three precedence bits in the ToS octet so 
that non-DiffServ compliant, ToS-enabled network device will not conflict with the 
DSCP mapping.  

Figure 93   

DiffServ: Differentiated Service Field

The DSCP value determines the forwarding behavior, the PHB (Per-Hop Behavior), 
that each packet gets across the DiffServ network.  Based on the marking rule, 
different kinds of traffic can be marked for different priorities of forwarding. 
Resources can then be allocated according to the DSCP values and the configured 
policies.

VLAN Tagging

Virtual Local Area Network (VLAN) allows a physical network to be partitioned into 
multiple logical networks. Only stations within the same group can communicate 
with each other. 

Your ZyXEL Device can add IEEE 802.1Q VLAN ID tags to voice frames that it 
sends to the network. This allows the ZyXEL Device to communicate with a SIP 
server that is a member of the same VLAN group. Some ISPs use the VLAN tag to 
identify voice traffic and give it priority over other traffic.

16.9.4  Phone Services Overview

Supplementary services such as call hold, call waiting, and call transfer. are 
generally available from your VoIP service provider. The ZyXEL Device supports 
the following services:

• Call Hold
• Call Waiting
• Making a Second Call
• Call Transfer
• Three-Way Conference

DSCP

(6-bit)

Unused

(2-bit)

Summary of Contents for P-2601HN(L)-F1 Series

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands